ats-4

Aaron ATS-4 Loudspeaker

RFQ

Acoustically neutral fibre board cabinet – Epoxy glued cladding – PVA glue used in all joints – Rear vented, Low Q Ratio alignment – Tandem woofers – Cloth speaker cone surrounds – Two layer speaker cone construction – Separate mid-range sub enclosure – Impregnated Polyester dome – Feron hemisphere – Highly stable vitrified Y35 magnets – Very large, high flux magnets – Polyester Imide voice coil windings – High input power tolerance – Phase compensated cross-over – Non ageing cross-over components – Bi wiring gold banana terminals – Wide environmental tolerance

Product Description

4 Driver, 3-Way Floorstanding Design.
2 x 173mm Bass Drivers.
Dual Laminated Cones.
1 x 136mm Midrange Driver.
Dual Laminated Cone.
1 x 25mm Tear Drop Tweeter.
Ferro-Fluid Cooled.
Recommended Amplifier Power: 50 Watts – 120 Watts RMS.
Recommended Maximum Input: 100 Watts RMS – Clean Power.
Frequency Response: 35Hz – 23kHz ± 3dB.
Crossover Frequency: 800Hz/5kHz.
Separate mid-range sub enclosure.
Polyester Imide voice coil windings.
Crossover Components: Non-Ageing Components.
Impedance: 6 ohms (Nominal).
Sensitivity: 93dB.
Bi-Wire/Bi-Amplifier Capable: Yes.
Speaker Spikes: Included.
Synthetic Timber Veneer.
Dimensions(WxHxD): 210 x 920 x 405mm.
Weight: 18kg each.
Made & Designed In Australia.