Each DOME is made of compressed cork. It has the shape and appearance of a cone but without a ‘point’ at the top.
Each set of Ringmat Domes contains one denser blue speckled Dome where the cork has a synthetic rubber binder. [paragragh]Full instructions for use are included in every pack of 3 or 4 domes
For weights up to 55kg, the LARGE Domes have a nominal diameter of 56mm and a height of approx. 25mm.
Where a lower profile is required, use the MINI Domes or the SMALL Domes.
When used in conjunction with RINGMAT FEET, DOMES can enable loudspeakers to provide a sound quality which is superior to that using traditional spikes.
This concept was first passed to us by the Danish hi-fi manufacturer Holfi, when they were trying the RINGMAT FEET under loudspeakers, but they needed an additional component to fit between the underside of the speaker and the top of the FEET.
RINGMAT DOMES were conceived as being the best solution, whereupon it was then established that they outperformed cones and most other forms of isolation point support under all sorts of components and in the support of platforms, shelving systems, etc.
Whilst using three DOMES instead of four may sometimes result in a superior sound quality, such arrangements are less secure.
This is a particularly important consideration with regard to loudspeakers. Therefore, when considering whether to use three or four DOMES, bear in mind the increased risk of accident when using three DOMES.